| |
Additional photos available by request.
SPECIFICATIONS:
30,000 lbs. WCP Coil Car
MFG: CWP(Cooper-Weymouth,Peterson) Formtek Group-Clinton, Maine))
Model:
S/N:
30,000 lbs Max. Capacity
60" Wide Deck
40" Center of "V" to Side Mast
18" Floor to botton of "V"
Pendant Control
Coil Steadies(Overhead)
Notes:
2 3/8" dia. Cam Shaft
1/2" Plate
60" x 30,000 lbs. CINCINNATI INC. MANDREL UNCOILER
MFG: CINCINNATI INC.
Model:
S/N: 6458E 12910A
S/N: HDR-787 & HDR-788
30,000 lbs. Max. Weight Capacity
60" Mandrel Face
16"-20" ID
72" OD(42" from CL of Mandrel to over arm shaft)
Full Length Hold Down
Slide Base
Wichita Brake
50" Floor to CL of Mandrel
54" LOOPCO SLITTING HEADS
LOOPCO ENTRY UNIT consisting of
Peeler Table
Pinch Rolls
Side Guides
Crop Shear-S/N: 6458E 12908
Two Drop In Type Slitter Heads- Single Eccentric design
Head no. one- Model: GII -6x52 L slitter, S/N: 6458-E 129958-C. 6"
Diameter Arbors, 55.5" Face Arbor Length
Comes with 2 sets of Shimless Tooling & Knives approx. 9.75"
OD(approx. 54 knives) another wooden box of knives(uncounted)
Head no two-Model GII 7.5x52 L slitter, S/N: 6458E 12910-B. 7.5"
Diameter Arbors, 55.5" Face Arbor Length
Comes with 3 sets of Shimmed Tooling& Knives approx. 11.75" OD, 12.25"
OD,
Slitter Drive-100 HP DC Motor, 500 V., 850/255 RPM with Drive(TBD)
125 HP 3.38:1 ratio Gear Box, 1750 RPM input, 520 RPM output, Serv.
Factor 1
LOOCO OSCILLATING SCRAP WINDER
13" wide x 44" Dia. Spool
Oscillating design
Rear discharge/dump
LOOPCO Pit Cross Over Table
LOOPCO Drag Board Tension Stand
S/N: 1592S 10021A
60" Face
Mult Separator Tooling Bar with set of Separator Spacer Tooling &
Discs
20,000 lbs. x 56" LOOCO RECOILER
Model:
S/N: 1050M-7149A-B
16" ID Pads for 20"
40" From CL of Mandrel to floor
75 HP DC Motor, 500 V., 850/2000 RPM to a
Turner Uni-Drive 2:1 & 1:1 Ratios & 20.93:1 Ratio to a
Loopco Reducer, 650/1950 RPM input, 31.3/93.9 output
20,000 lbs. LOOPCO COIL CAR
S/N: 1592 S 10023A
20,000 lbs max. weight Capacity
40" Wide Deck with extension beyond
33" from CL of "V" to Side Mast
20,000 lbs. LOOPCO one arm Turnstile
S/N: 1050 7 52 (to be confirmed)
20,000 lbs max weight capacity
61" usable Arm Length with wear bars
49" from Floor to top of Arm
6.5" x 8" Deep Channel for C-Hook Use
Rotek Bearing L3-297-29-9.74
approx. 7' from center to end of arm, 141" total length
Loopco Down Layer
49" From top of Horn to Floor
Horn Length:
Approx. 42" pass height
Idle Conveyor Top
The unit has manually operated traversing capability as well as horn
extension
45 degree Conveyor
90 degree Conveyor
SIGNODE BANDING HEAD & TABLE
S/N: 1256 N 7825 A
Signode Head: M20 SVS 58
60" face driven Conveyor Rolls
2 conical rolls for rotation of coil
15' Straight idle Conveyor
3.5" Dia. x 64" face rolls, 6.125" center to center
Approx. 40" pass height conveyor has adjustable legs
14' Straight idle Conveyor with split at end
10' Straight idle conveyor
3.5" Dia. x 64" face rolls, 6.125" center to center
4' of split conveyor at end to lift coil for stacking
Additional Equipment:
Signode Banding Head & Table
67" Roll face, 3.5" diameter rolls, 1.125 dia. Shaft
3 Conical Rolls for Rotation, 36" From CL to outside of conical roll
42" Pass Height
Signode Head: M200-12
Ship Weight 8200#
Signode Banding Head & Table
6,000 lbs weight capacity
60" OD
Signode SV Head: M20 SVS6-58
PRICE....................: SEND A QUOTATION!!!
|
|
